Description

VibroPro R

Working width from 4m to 9m feature excellent transport abilities as they are hydraulically foldable, via automatic tilting inwards/outwards of the wing sections which are mounted on robust frame of exceptionally good stress capacity

VibroPro R models are equipped with front cage rollers Ø380mm made of round rods. Those cage rollers enable easy and exact depth regulation via a crank handle, while they enhance the leveling result. VibroPro R models are also very suitable for very shallow seedbed preparation. Front cage rollers are always accompanied by a front knife bar which carries crumbling knifes. That knife bar is in front of every front roller and is height adjustable. Those knifes attached to it assist in crushing, grinding and milling the otherwise unworkable clay or the bigger clods.

  • 3-point hitch cat. 3
  • Robust, hydraulic folding frame 200x200x10 mm
  • 4 rows of S-tines made of 50x50mm square pipes
  • Adjustable front cage rollers Ø380, supported in ball bearings, for precision cultivation
  • Adjustable front knife bar with crumbling knifes
  • Reinforced, adjustable, double rear crumbler roller Ø310mm, bearing mounted, shaft Ø30mm

Yields top results for general use. It achieves a marvelous penentrability and an intense mixing of the soil. The vibrating spring tines mix and aerate at the working depth determined by you. Not only do they vibrate in the driving direction they also do so laterally while barely moving up and down. 32×10 reinforced long lasting S-tine, strong and intensely vibrating, the soil tillage effect produced is phenomenal and cultivation is often completed in a single pass. Also suitable for stony soils.

Two rear cage rollers complete optimal seedbed preparation and leveling for accurate depth control in combination with a simple pin and tie-rod system provides the function of matching ideal working depth of tines.    

         • Action 1:   Levelling. The adjustable front knife bar with crumbling knifes intensifies the soil tilling process of the roller, while perfectly levelling it.
         • Action 2:  Control of depth. The adjustable front cage rollers Ø380, which are supported in ball bearings, guarantee precise guidance and therefore a uniform working depth from left to right and front.
to back.
         • Action 3:  Cultivating & crushing. The robust 4 rows of S-tines ensure a free flow of soil between them. They also allow to work deeper even in trashy conditions without the risk of blocking.to back.
         • Action 4:  Crumbling  & consolidation. The final double rear crumbler roller ensures the soil is perfectly reconsolidated and provides a flawless finished seedbed.

Rear rake tines

Three options of sweep point:
1) 150x4mm
2) 175x4mm
3) 200x4mm

Reflective warning boards kit with or without lights
Model VibroPro R 400 VibroPro R 450 VibroPro R 500 VibroPro R 600 VibroPro R 700 VibroPro R 800 VibroPro R 900
Working width (m)
4,0
4,5
5,0
6,0
7,0
8,0
9,0
Transport width (m)
2,4
2,4
2,4
2,4
2,4
3,0
3,0
Number of S-tines
36
38
42
48
58
68
76
Weight (kg)
1510
1750
1870
2100
2492
2970
3560
Tractor power (HP)
100-110
110-120
120-140
140-160
160-200
200-250
230-300
Photo Gallery

Reviews

There are no reviews yet.

Be the first to review “VibroPro R”

Your email address will not be published. Required fields are marked *

Τα cookies μας βοηθούν να βελτιώσουμε την εμπειρία σας στην ιστοσελίδα μας. Χρησιμοποιώντας αυτό το site, συμφωνείτε με τη χρήση των cookies… Περισσότερα…