Description
VibroPro T
VibroPro T hydraulically foldable frame seedbed combination, trailed version for easy transport up to 9m working width.
The robust construction, the S-tine spacing that are distributed over 4 rows and the adjustable, double rear crumbler roller level the soil, improve aeration, penetration and mixing of chopped trash. Α farm implement for stirring and pulverizing the soil before planting. Removes left over weeds, aerate and loosens the soil, creating the ideal seedbed. Contemporary design to cope with today’s high performance and tillage requirements.
- Semi-mounted
- Robust, hydraulic folding frame 200x200x10 mm
- 4 rows of S-tines made of 50x50mm square pipes
- Reinforced, adjustable, double rear crumbler rollers Ø350 mm, bearing mounted, shaft Ø40 mm
- Wheels 400/60-15
Yields top results for general use. It achieves a marvelous penentrability and an intense mixing of the soil. The vibrating spring tines mix and aerate at the working depth determined by you. Not only do they vibrate in the driving direction they also do so laterally while barely moving up and down. 32×10 reinforced long lasting S-tine, strong and intensely vibrating, the soil tillage effect produced is phenomenal and cultivation is often completed in a single pass. Also suitable for stony soils.
Two rear cage rollers complete optimal seedbed preparation and leveling for accurate depth control in combination with a simple pin and tie-rod system provides the function of matching ideal working depth of tines.
(x4) Truck eradicators 30x30mm
(x4) Truck eradicators 40x10mm reinforced
Fully adjustable front plate-bar.
The bar squashes the clods, levels the surface and evens out the tractor tracks. A tension spring protects it from overload.
Hydraulic levelling board
Pair of rubber supporting wheels
For tractors with lower lifting ability wheels can be mounted in order to less the burden on the tractor’s hydraulics during work.
Rear rake tines
Crosskill roller Ø350mm one row instead of crumbler roller
Three options of sweep point:
1) 150x4mm
2) 175x4mm
3) 200x4mm
Drawbar linkage with ball joint towing eye cat. 4 Ø51mm
| Model | VibroPro T 400 | VibroProT 450 | VibroPro T 500 | VibroPro T 600 | VibroPro T 700 | VibroPro T 800 | VibroPro T 900 |
|---|---|---|---|---|---|---|---|
|
Working width (m) |
4,0 |
4,5 |
5,0 |
6,0 |
7,0 |
8,0 |
9,0 |
|
Transport width (m) |
2,4 |
2,4 |
2,4 |
2,4 |
2,4 |
2,4 |
2,4 |
|
Number of S-tines |
36 |
38 |
42 |
48 |
58 |
68 |
76 |
|
Weight (kg) |
1750 |
1800 |
1930 |
2070 |
2240 |
2650 |
3150 |
|
Tractor power (HP) |
100-110 |
110-120 |
120-130 |
130-160 |
160-180 |
200-250 |
250-300 |
Reviews
There are no reviews yet.